technical data sheet rpc-7 straight plug 07P121-272S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to iec 457-2 documents assembly instruction 02 a3 material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m, over nickel outer contact beryllium copper gold, min. 1.27 m, over chemical nickel body stainless steel passivated coupling nut stainless steel passivated dielectric ppe solder sleeve brass gold, 0.1 m min.
technical data sheet rpc-7 straight plug 07P121-272S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 frequency dc to 18 ghz return loss 26 db, dc to 18 ghz insertion loss 0.05 x db insulation resistance 5 g center contact resistance 1.0 m outer contact resistance 0.1 m test voltage 1000 v rms working voltage 335 v rms rf-leakage 120 db up to 1 ghz - limitations are possible due to the used cable type - mechanical data mating cycles 5000 center contact captivation 28 n coupling test torque 1.95 nm recommended torque 1.36 nm environmental data temperature range -40c to +85c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, method 101, condition b vibration mil-std-202, method 204, condition d shock mil-std-202, method 213, condition i moisture resistance mil-std-202, method 106 2002/95/ec (rohs) compliant tooling n/a suitable cables ut 141 / rtk-fs 141 / rtk-flex 402 packing standard 1 pce in bag weight 47.2 g/pce draft date approved date rev. engineering change number name date herbert babinger 05/08/04 krautenbacher j. 19/10/06 b00 06-0478 b. dandl 19/10/06 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommenda tion to infringe existing patents. in the effort to improve ou r products, we reserve the right to make changes judged to be necessary.
|
